Products
eNeRGy+ R410A
91 - 164 kW
97 - 160 kW
15500 - 27000 m3/h
eNeRGy
50 - 175 kW
53 - 170 kW
13500 - 27000 m3/h
Flexair R410A
85 - 217 kW
79 - 222 kW
15000 - 39000 m3/h
Baltic R410A
21 - 115 kW
22 - 122 kW
4200 - 23500 m3/h
e-eNeRGy R32
109 - 163 kW
112 - 168 kW
18900 - 27000 m3/h
e-Baltic R32
30 - 207 kW
31 - 207 kW
7000 - 35000 m3/h
Evio R32
29 - 250 kW
29 - 247 kW
4000 - 49500 m3/h
Neosys R410A
200 - 500 kW
200 - 1000 kW
Aqua4 R410A
50 - 350 kW
50 - 300 kW
eComfort R410a
20 - 180 kW
20 - 190 kW
eComfort R32 R32
35 -210 kW
35 -210 kW
eComfort R32
170 - 400 kW
220 - 450kW
Aqualean R410A
6.8 - 41 kW
8 - 50 kW
1250 - 7500 m3/h
Compactair R410A
22 - 82 kW
20 - 80 kW
5400 - 18700 m3/h
Flatair R410A
22 - 33 kW
20 - 29 kW
3700 - 5600 m3/h
ASC/ASH R410A
19;8 - 218 kW
19.7 - 228 kW
e-Lite HFC
3 - 96 HP
8 - 270 kW
Axil-Equitherm Water
4 - 20 kW
12 - 105 kW
1600 - 9100 m3/h
Allegra II Water
0.7 - 11.6 kW
0.5 - 8.9 kW
60 - 1670 m3/h
Inalto Water
3,7 - 37,7 kW
3 - 28 kW
516 - 5668 m3/h
Comfair II HD Water
1.3 - 3.8 kW
1.5 - 4.3 kW
250 - 780 m3/h
Comfair HH/HV Water
4,9 - 60 kW
2.8 - 50.6 kW
840 - 8000 m3/h
Armonia II Water
1.5 - 10.8 kW
1.9 - 13.5 kW
225 - 1536 m3/h
Cleanair LX
10 - 1500 kW
2 - 1300 kW
1000 - 100000 m3/h
OneAir
1100 - 100000 m3/h
NEOSTAR HFC
18 - 1280 kW
V-King
50 - 2200 kW
FC NEOSTAR
20 - 1200 kW
Innov@ DHFCF/DHFCS
33 - 266 kW
15500 - 58000 m3/h
Innov@ Energy Inverter
3 - 90 kW
2150 - 25300 m3/h
@dnova
2.5 - 38 kW
950 - 10000 m3/h
Innov@
6 - 240 kW
1785 - 39000 m3/h
Mini R@ckcoolair
3 - 7.3 kW
915 - 1330 m3/h
R@ckcoolair
5 - 75 kW
700 - 11000 m3/h
DatAdiab
10 - 330 kW
15000 - 82500 m3/h
e-savvy
LennoxOneWeb
LennoxCloud
LennoxHydroControl
chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Redge EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Redge-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Redge specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Redge-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Redge